# Paper grammage, thickness and stiffness: what does each tell you?

Canonical: https://www.topabel.com/resources/kb/fundamentals/paper-weight-thickness-stiffness/

Source URL: https://www.topabel.com/resources/kb/fundamentals/paper-weight-thickness-stiffness/

Use a scale, a thickness measurement and a bending comparison to understand three different paper properties.

TOPABEL KNOWLEDGE SERIES / 07

Paper grammage, thickness and stiffness: what does each tell you?

Grammage is mass per unit area, thickness is the distance between the two faces, and bending stiffness is resistance to bending. Paper of the same grammage can differ in both thickness and stiffness.

Read the specifications · About 3 min read

  

    

On this page

     [01 Three measurements, three questions](#section-1)  [02 Read the units and identify the layer](#section-2)  [03 Compare how the paper bends](#section-3) 

    
     [Quick questions](#article-questions) 

   

01

Three measurements, three questions

      

The scale compares mass for a known area. The middle panel shows the thickness of a sheet in cross-section. On the right, two samples with the same overhang are shown bending differently under the same load.

      

      

![A paper square on a scale, a thickness gauge contacting both faces of a sheet, and two strips with equal loads but different deflection.](https://www.topabel.com/assets/knowledge/paper-three-properties.webp)

        123

        

1Grammage · mass for a known area

2Thickness · distance between faces

3Stiffness · resistance to bending

AI-generated illustration of measurement principles.

      

      

     

02

Read the units and identify the layer

      

Grammage is normally shown in g/m². As a simple example, a 10 × 10 cm piece of 200 g/m² paper has a theoretical mass of 2 g. Thickness may be shown in µm or mm. For adhesive products, check whether a value describes the face stock alone or the complete construction with adhesive and release liner.

      

      

      

     

03

Compare how the paper bends

      

Thickness and fibre structure both influence bending. Paper can also behave differently along and across its grain. For a qualitative comparison, line up strips of equal width and length in the same grain direction, with the same overhang and load. Treat this as a visual comparison of those samples.

      

      

      

     

    

Quick questions

Can g/m² be converted directly to millimetres?

The conversion also requires the material’s apparent density. Read the stated thickness or measure the actual material.

Does a thicker sheet always feel stiffer?

Thickness is one factor. Fibre structure, grain direction and the material construction also affect bending.

 [Read the rest of a product specification](https://www.topabel.com/resources/kb/fundamentals/read-target-specifications/)  [Holmen paperboard properties reference](https://www.iggesund.com/insights/paperboard-know-how/paperboard-manual/paperboard-manual-publication/baseboard-physical-properties/complex-physical-properties/) 

      [← How to read target paper specifications](https://www.topabel.com/resources/kb/fundamentals/read-target-specifications/) 
      [Back to the series](https://www.topabel.com/resources/kb/fundamentals/) 
      [What to check when your target samples arrive: a six-point illustrated guide →](https://www.topabel.com/resources/kb/fundamentals/sample-inspection/)
