# How to read target paper specifications

Canonical: https://www.topabel.com/resources/kb/fundamentals/read-target-specifications/

Source URL: https://www.topabel.com/resources/kb/fundamentals/read-target-specifications/

Learn where to find a target’s SKU, dimensions, paper weight, thickness, pack contents and quote unit, with illustrated examples from TOPABEL.

TOPABEL KNOWLEDGE SERIES / 06

How to read target paper specifications

Use the complete SKU to identify the product. Read its physical parameters and pack contents in the product specifications, then check the order quantity and price unit in the quotation. Each source answers a different part of the purchase.

  

  

    

On this page

     [01 Identify the exact product with its SKU](#section-1)  [02 Read the physical parameters](#section-2)  [03 Separate pieces, packs and order quantities](#section-3)  [04 Read the unit attached to the price](#section-4) 
     [05 Product examples](#sku-example) 

    

   

01

Identify the exact product with its SKU

      

A SKU is the product’s identifier. Keep the entire code when searching, requesting a sample or checking a quote. For the example below, the product specifications confirm a 4 × 4 inch sticker; the 0404 segment is a useful size cue for this model. Read the backing, material and packing in the product description as well.

      

TB-TR-QF-0404-RA-SPL-03

SKU

Match the complete product identifier and its photograph.

Specifications

Find the dimensions, material, paper weight, thickness and pack contents here.

Quotation and order

Check the selected packing, ordered quantity, price and the unit attached to that price.

      

      

Paper weight, thickness and pack contents come from the product specifications. The ordered quantity comes from the order.

02

Read the physical parameters

      

Start with one finished sheet or sticker. Its size describes the outside edges after cutting, including any surrounding white margin. The printed area sits within those edges, and a main aiming zone may be only one part of that area. For a circular sticker, check the stated diameter.

      

Dimensions and units

Check width × height and the unit. 1 in = 2.54 cm, so a 4 × 4 inch sticker measures 10.16 × 10.16 cm. Roll dimensions may describe one sticker.

Face material

The material carrying the print, such as paper, film or board, should be stated for the selected SKU.

Paper weight, g/m²

This is the mass of one square metre of the specified paper. Check which paper layer the value describes when comparing adhesive products.

Thickness, mm or µm

Thickness is measured through the material. Confirm whether a value covers the face material alone or the full construction including adhesive and liner.

Backing and release liner

Check whether the product is adhesive. The removable liner protects the adhesive before application.

Surface finish

Standard print, reactive splatter and thermal products describe different surface features. Confirm the finish in the selected product’s description.

       

![A square TOPABEL target shows its finished outer edge and printed circle; a second view shows a corner peeled from the white release liner.](https://www.topabel.com/assets/knowledge/target-spec-parameters.webp)

        123

        

1Finished outer edge

2Printed target area

3White release liner

AI-generated illustration

      

      

Paper weight and thickness are separate specifications. Use the stated material values for the selected SKU when making comparisons.

03

Separate pieces, packs and order quantities

      

A single target, the contents of its package and the quantity ordered describe three different counts. For the TOPABEL roll in this article, each sticker is 4 × 4 inches and each roll holds 100 stickers. Ordering 100 rolls is an arithmetic example below.

      

One piece

One sheet or one sticker. The individual size applies to this item.

Package contents

How many sheets are in a pack, or how many stickers are on a roll. Check the selected packing.

Order quantity

How many pieces, packs or rolls the order specifies. Always write the number with its unit.

       

![One square green-and-black TOPABEL sticker sits beside a roll of the same design with its core and paper layers visible.](https://www.topabel.com/assets/knowledge/target-spec-quantity.webp)

        12

        

1One finished sticker

2One complete roll

AI-generated illustration

      

      

100 rolls × 100 stickers per roll = 10,000 stickers

A pack is a packaging unit. Its sheet count must be stated separately. Confirm any MOQ together with its purchase unit.

04

Read the unit attached to the price

      

Put the price and unit side by side when comparing quotations. A per-piece price applies to one finished target. A per-pack price applies to a stated pack. TOPABEL roll products are quoted per complete roll. Compare the contents as well as the number on the quotation.

      

Read together

Currency, unit price, price unit and contents per pack or roll.

Calculate on the same basis

Multiply unit price by the ordered quantity in that unit. For a piece-cost comparison, divide the pack or roll price by its contents.

      

If one roll costs P and you order 100 rolls: product amount = 100 × P

For a roll of 100 stickers: equivalent price per sticker = P ÷ 100

P represents the quoted price in its stated currency. These formulas illustrate unit conversion; use the confirmed quotation for the actual order.

05

Read two real product specifications

    

![12 × 18 inch standard paper sheets](https://image.topabel.com/topabel_sku/TB-SI-ZP-1218-SP-STD-07/tb-si-zp-1218-sp-std-07-01.666a6fd14635.webp)

    12 × 18 inch standard paper sheetsNon-adhesive flat sheets, quoted per piece. Confirm the number of sheets in each pack.
      [TB-SI-ZP-1218-SP-STD-07 ↗](https://www.topabel.com/products/TB-SI-ZP-1218-SP-STD-07/) 

   

![4 × 4 inch reactive sticker roll](https://image.topabel.com/topabel_sku/TB-TR-QF-0404-RA-SPL-03/tb-tr-qf-0404-ra-spl-03-01.fcdbc6c38623.webp)

    4 × 4 inch reactive sticker rollSelf-adhesive paper, 100 stickers per roll, quoted per roll.
      [TB-TR-QF-0404-RA-SPL-03 ↗](https://www.topabel.com/products/TB-TR-QF-0404-RA-SPL-03/) 

   

Read two TOPABEL products using the same fields

Specification

Paper sheet example

Sticker roll example

Finished dimensions

One sheet, 12 × 18 in

One sticker, 4 × 4 in

Face material

Paper

Paper

Adhesive backing

Non-adhesive

Self-adhesive, with release liner

Surface finish

Standard print

Reactive splatter

Supply format

Flat sheets

Roll

Pack contents

Confirm sheets per pack

100 stickers per roll

Price unit

Piece, one sheet

Roll, one complete roll

Paper weight and thickness

Confirm the parameters for this SKU

Confirm the parameters for this SKU

    

 [Review paper targets, stickers, sheets and rolls](https://www.topabel.com/resources/kb/fundamentals/target-formats/)  [Review order and packaging requirements](https://www.topabel.com/custom-oem/#order-confirmation) 

      [← Rings, grids, crosses and outlines: how to read a target face](https://www.topabel.com/resources/kb/fundamentals/target-face-layouts/) 
      [Back to the series](https://www.topabel.com/resources/kb/fundamentals/) 
      [Paper grammage, thickness and stiffness: what does each tell you? →](https://www.topabel.com/resources/kb/fundamentals/paper-weight-thickness-stiffness/)
