# What to check when your target samples arrive: a six-point illustrated guide

Canonical: https://www.topabel.com/resources/kb/fundamentals/sample-inspection/

Source URL: https://www.topabel.com/resources/kb/fundamentals/sample-inspection/

Follow a visual sequence for sample identity, dimensions, printing, backing, packing and records. Keep initial checks separate from functional evaluation.

TOPABEL KNOWLEDGE SERIES / 08

What to check when your target samples arrive: a six-point illustrated guide

First confirm what was supplied, then check its physical details and packing, and finally record your observations. For TOPABEL samples, keep the SKU, artwork version and agreed requirements together. Initial visual checks help find differences; they do not replace a separate evaluation of the intended use.

Store and inspect · About 6 min read

  

    

On this page

     [01 Checks 1–2 · identity and finished dimensions](#section-1)  [02 Checks 3–4 · print, cut edges and backing](#section-2)  [03 Checks 5–6 · package contents and an inspection record](#section-3)  [04 After receipt checks, evaluate the intended use separately](#section-4) 

    
     [Quick questions](#article-questions) 

   

01

Checks 1–2 · identity and finished dimensions

      

Keep the carton and labels before opening. Match the complete SKU, artwork revision and requested sample configuration to the supplied item. Then lay one sheet flat and measure its finished outer width and height. For a round item, check its diameter. Measure the printed area separately if it matters to your requirements.

      

Record

SKU, artwork revision, stated size and measured size, with the same units.

Compare

Use the agreed specification and tolerances, rather than estimating from a product photo.

       

![On the left, a full-size target is checked beside its carton and record sheet; on the right, a ruler is placed along the finished outer edge.](https://www.topabel.com/assets/knowledge/sample-check-identity.webp)

        12

        

1Match the item and its records

2Measure the finished outer edge

AI-generated educational illustration · not a product test record

      

      

The ruler image demonstrates placement, not a certified measurement or a dimension for a named SKU.

02

Checks 3–4 · print, cut edges and backing

      

Check the whole face first, then inspect fine lines, colour boundaries and cut edges. Look for a missing element, smudging, visible misalignment or damaged edges, and compare against the agreed artwork or retained sample. For an adhesive target, use one sample to inspect the release liner and separate a small corner. Keep other samples intact for later comparison.

      

Non-adhesive paper

Inspect the sheet itself; there is no release liner to peel away.

Adhesive targets

Separate a liner check from an application trial on the intended clean, dry surface.

Record observations precisely

Describe which edge or printed region is affected and attach a close photograph.

       

![A magnifier shows the printed lines on a full-size target; a second view shows a small corner of the printed face lifted from the white liner.](https://www.topabel.com/assets/knowledge/sample-check-print-backing.webp)

        34

        

3Inspect lines and colour boundaries

4Check face and release liner

AI-generated educational illustration · not a product test record

      

      

A clean peel does not by itself establish adhesion strength or suitability for every mounting surface.

03

Checks 5–6 · package contents and an inspection record

      

Check the packing configuration, labels and contents against the sample request. Distinguish a sample pack from the retail or bulk packing being proposed. For rolls, confirm whether the count is targets per roll or the number of rolls supplied. Photograph the whole sample, any detail that differs and the packaging label together as one record.

      

Identity

SKU, artwork revision, receipt date and sample reference.

Results

Measured dimensions, stated packing and observed differences.

Next action

Accepted points, changes requested and items still requiring evaluation.

       

![On the left, hands check a pack of large sheets beside a compact roll; on the right, a phone photographs the physical sample beside a ruler and record sheet.](https://www.topabel.com/assets/knowledge/sample-check-pack-record.webp)

        56

        

5Check contents and packing

6Photograph and keep a record

AI-generated educational illustration · not a product test record

      

      

A clear record is more useful than a message saying only “looks fine” or “something is wrong”.

04

After receipt checks, evaluate the intended use separately

      

Visual checks answer whether the supplied item matches its records. A separate application or use evaluation answers whether it meets the agreed purpose. For a reactive finish, record the lighting and viewing conditions when assessing appearance. For adhesive backing, record the mounting surface and observation time. Keep subjective impressions separate from measurements.

      

Before evaluation

Agree on the items, conditions and acceptance criteria.

When confirming a sample

Identify whether the acceptance reference is a retained physical sample, photographs or another agreed record.

For TOPABEL orders

Keep the confirmed reference identifiable. Pre-shipment sampling checks are compared with the agreed reference.

      

      

Six checks to remember: identity, dimensions, print, backing, packing, records.

    

Quick questions

Do non-adhesive sheets need a liner check?

No. Check its paper, print and cut edges. A liner check applies to products supplied with adhesive backing and a release liner.

Does a sample bag define the final retail packing?

Not necessarily. Confirm whether the sample includes the proposed finished packing, its labels and agreed contents.

 [Understand the specification fields](https://www.topabel.com/resources/kb/fundamentals/read-target-specifications/)  [Store samples after inspection](https://www.topabel.com/resources/kb/fundamentals/target-storage/) 

      [← Paper grammage, thickness and stiffness: what does each tell you?](https://www.topabel.com/resources/kb/fundamentals/paper-weight-thickness-stiffness/) 
      [Back to the series](https://www.topabel.com/resources/kb/fundamentals/) 
      [Why does the colour look different on screen, in photos and on paper? →](https://www.topabel.com/resources/kb/fundamentals/screen-photo-print-colour/) 

   

ONLINE TARGET DESIGNER

Keep a design reference for sample review.

Send your template or SKU and a screenshot to our team. Confirm the artwork version, then compare the physical sample with that agreed reference.

 [Start designing ↗](https://www.topabel.com/design/) 

The workspace supports English and Chinese. Editable options vary by template. Drafts stay in this browser; email or WhatsApp a screenshot to our team. Saving a draft does not submit an inquiry.
