# Why does the colour look different on screen, in photos and on paper?

Canonical: https://www.topabel.com/resources/kb/fundamentals/screen-photo-print-colour/

Source URL: https://www.topabel.com/resources/kb/fundamentals/screen-photo-print-colour/

Follow the same colour area through a design preview, a phone photo and a printed proof, then learn how to document a difference.

TOPABEL KNOWLEDGE SERIES / 09

Why does the colour look different on screen, in photos and on paper?

A display emits light, printed paper reflects the light around it, and a camera records an interpretation of that scene. Display settings, camera settings, lighting, ink and paper can all change the appearance of the same design.

Store and inspect · About 3 min read

  

    

On this page

     [01 Compare the same patch in three places](#section-1)  [02 Identify where the change enters](#section-2)  [03 Record a comparison your supplier can repeat](#section-3) 

    
     [Quick questions](#article-questions) 

   

01

Compare the same patch in three places

      

The main swatch represents the same area of a design in all three panels. Look at the green patch, the three grey patches below it and the surrounding white area. In the phone photo, the warm lamp changes the appearance of the entire sheet. The colour shifts in the illustration are exaggerated so you can see what changes together.

      

      

![The same design appears as a vivid green on a display, warmer yellow-green in a phone photo, and muted green on a paper proof.](https://www.topabel.com/assets/knowledge/color-screen-photo-print.webp)

        123

        

1Screen preview · emitted light

2Phone photo · capture and processing

3Printed proof · reflected light

AI-generated illustration. Colour shifts are exaggerated for comparison.

      

      

     

02

Identify where the change enters

      

Display brightness and colour mode affect the preview. Exposure and white balance can make a phone image brighter, warmer or cooler. On a physical sample, paper colour, ink and surface gloss change how light is reflected. If a colour moves as you tilt the sheet, note the viewing angle and look for glare.

      

      

      

     

03

Record a comparison your supplier can repeat

      

Place the reference and sample side by side under the same stable light. Identify the exact area, describe the difference and record the sample and artwork revisions. If you send a photo, put both pieces in the same frame and record the light source. For approval, agree on the physical reference and viewing conditions with the supplier.

      

      

      

     

    

Quick questions

Can I approve print colour from a phone photo alone?

A photo helps locate and describe a difference. Use an agreed physical proof under consistent lighting when colour approval matters.

What should I write beside a comparison photo?

Include the sample and reference versions, the area being compared, the lighting and the direction of the difference.

 [Return to the sample inspection checklist](https://www.topabel.com/resources/kb/fundamentals/sample-inspection/)  [Adobe guide to viewing screen and print colour](https://helpx.adobe.com/photoshop/desktop/print/prepare-your-workspace-for-color-printing.html) 

      [← What to check when your target samples arrive: a six-point illustrated guide](https://www.topabel.com/resources/kb/fundamentals/sample-inspection/) 
      [Back to the series](https://www.topabel.com/resources/kb/fundamentals/) 
      [How to store paper targets and target stickers →](https://www.topabel.com/resources/kb/fundamentals/target-storage/)
