# How to store paper targets and target stickers

Canonical: https://www.topabel.com/resources/kb/fundamentals/target-storage/

Source URL: https://www.topabel.com/resources/kb/fundamentals/target-storage/

An illustrated guide to checking paper targets on arrival, storing sheets and rolls, and inspecting opened packs of adhesive stickers.

TOPABEL KNOWLEDGE SERIES / 10

How to store paper targets and target stickers

Keep paper targets and stickers in a cool, dry place out of direct sunlight. Store sheets flat, keep rolls wound on their cores, and reseal opened packs with the release liner still on unused stickers.

  

  

    

On this page

     [01 Inspect the delivery before putting it away](#section-1)  [02 Store sheets and rolls in their original shape](#section-2)  [03 Reseal opened stickers and check one before using more](#section-3)  [04 Confirm shelf life for the specific reactive SKU](#section-4) 

     [Quick reference](#quick-reference) 

   

01

Inspect the delivery before putting it away

      

Keep the carton label until you’ve checked the order. If you find damage, set the affected pack aside and photograph the carton label and the damaged area.

      

Carton

Look for water marks, crushed corners or torn packaging.

Label

Match the SKU and quantities against the order. For sheets, check the sheet count per pack. For rolls, check the number of rolls and the quantity per roll.

Product

Open one pack for a spot check. Look at the sheet edges and printing. For sticker rolls, also check the core and release liner.

       

![At an inspection bench, a hand lifts the corner of a flat sheet pack beside a labeled carton and a sticker roll.](https://www.topabel.com/assets/knowledge/target-storage-receiving.webp)

        1234

        

1Check the carton

2Match the label

3Check sheet edges

4Check the core

AI-generated illustration

      

      

     

02

Store sheets and rolls in their original shape

      

Choose a dry indoor shelf away from direct sunlight and heat. Keep the packages off the floor and leave heavy cartons off the stock.

      

Sheets

Keep sheets in their packaging and lay the whole pack flat on the shelf, with the corners fully supported.

Rolls

Leave the roll wound on its core. Put it back in its bag and box, or use a resealable bag if the original bag no longer closes.

       

![Flat packs fully supported by a shelf beside a bagged sticker roll in a carton.](https://www.topabel.com/assets/knowledge/target-storage-shelf.webp)

        12

        

1Lay sheets flat

2Bag and box the roll

AI-generated illustration

      

      

     

03

Reseal opened stickers and check one before using more

      

Take out only what you need. Leave the release liner on the rest and reseal the pack. When you reopen it, check one sample for a torn liner or an edge that has already lifted. If it looks intact, try that sticker on a clean, dry backing surface and check that the edges lie flat before using more.

      

      

![Three illustrations based on a TOPABEL 12 × 12 inch adhesive target show resealing a full-size pack, checking a sample’s white release liner and smoothing the sample onto a board.](https://www.topabel.com/assets/knowledge/target-storage-recheck.webp)

        123

        

1Reseal the bag

2Check the liner

3Test one sticker

AI-generated illustration

      

      

     

04

Confirm shelf life for the specific reactive SKU

      

For longer-term stock, give TOPABEL the SKU, whether the pack has been opened, and where and how it is stored. Confirm the shelf life and storage conditions for that specific product. Keep the SKU label and use older stock first when the packs are in good condition.

      

      

![A labeled carton, sealed and opened packs of reactive stickers, and a notebook for storage records.](https://www.topabel.com/assets/knowledge/target-storage-inventory.webp)

        123

        

1Note the SKU

2Check if opened

3Record conditions

AI-generated illustration

      

      

     

    

Quick checks for common problems

Match what you see to the examples, then check the packaging or application surface. Keep the label and photos for reference.

       

         

![A large printed paper target on a flat tabletop, with visible waves and shadows along the raised front edge.](https://www.topabel.com/assets/knowledge/target-storage-curl.webp)

         Look along the edge for a gap above the flat surface.AI-generated example

        

01

Sheets curl or develop waves

Check first

Look for moisture inside the bag and pressure marks on the carton.

Record

Place one sheet on a flat surface and photograph it from the side so the curl is visible.

         

![The corner of a full-size yellow and black adhesive target has lifted slightly from a wooden backer, revealing a narrow gap.](https://www.topabel.com/assets/knowledge/target-storage-lifting.webp)

         Check where the sticker edge separates from the backer.AI-generated example

        

02

Sticker edges lift after application

Check first

Check that the application surface is clean and dry.

Compare

Take an unused sticker from the same pack and check whether its edge is already lifting from the release liner.

         

![A compact target roll with an uneven, dented cardboard core opening beside a carton with a crushed corner.](https://www.topabel.com/assets/knowledge/target-storage-core.webp)

         Look at the core opening and the nearby carton corner.AI-generated example

        

03

A roll is crushed or difficult to unwind

Check first

Look for dents in the carton and flattening or an inward dent in the core opening.

Record

Photograph the roll end and the damaged carton. Keep the packaging label to identify the affected stock.

    

    

 [Open the sample evaluation checklist](https://www.topabel.com/factory/quality/#sample-evaluation)  [Read the FAQ on target storage](https://www.topabel.com/resources/kb/faq/#faq-0088)  [Read the FAQ on lifting sticker edges](https://www.topabel.com/resources/kb/faq/#faq-0089)  [Read the FAQ on reactive target shelf life](https://www.topabel.com/resources/kb/faq/#faq-0090) 

      [← Why does the colour look different on screen, in photos and on paper?](https://www.topabel.com/resources/kb/fundamentals/screen-photo-print-colour/) 
      [Back to the series](https://www.topabel.com/resources/kb/fundamentals/) 
      [Why do target sticker edges lift, and why can removal leave adhesive residue? →](https://www.topabel.com/resources/kb/fundamentals/sticker-edge-lift-adhesive-residue/)
