# Target manufacturing: prepress, process planning and production control

Canonical: https://www.topabel.com/resources/kb/process-production/

Source URL: https://www.topabel.com/resources/kb/process-production/

Go inside the manufacturing workflow: arrange the print layout, plan operations, align printing with cutting, finish sheets and rolls, and investigate production differences.

KNOWLEDGE / INSIDE MANUFACTURING

One design.A production plan.

A finished drawing still needs a repeat layout, an order of operations and a shared print-to-cut reference. Follow the decisions between the file and the production run.

    [Start at prepress ↓](#artwork) 

Prepress · Process planning · Finishing · Production differences

![Paper feeding through printing equipment in the workshop.](https://www.topabel.com/assets/company/printing-paper-guide-retouched-20261118.webp)

Workshop photograph / Feeding material into the process

FOLLOW THE PRODUCTION JOB

 [01 Prepress & repeat layout](#artwork) 

 [02 Plan the operations](#process-plan) 

 [03 Print-to-cut alignment](#printing) 

 [04 Cut, slit & rewind](#finishing) 

 [05 Control production changes](#consistency) 

 [06 Investigate a difference](#troubleshooting) 

 [Watch the workshop ↗](https://www.topabel.com/factory/#factory-process) 

    01

The product drawing is not the press layout.

Prepress connects one finished design with the space and references required by the equipment and later operations.

  

ONLINE TARGET DESIGNER

Still working on the target artwork?

Use the workbench to prepare a starting design. The guide explains how to add your Logo, save the design and download an image for our team. Production layouts, cut paths and process requirements are confirmed separately.

 [Start designing ↗](https://www.topabel.com/design/)  [Read the design guide →](https://www.topabel.com/design/help.html#start) 

The workspace supports English and Chinese. Editable options vary by template. Drafts stay in this browser; email or WhatsApp a screenshot to our team. Saving a draft does not submit an inquiry.

    

In the guide [Add your brand Logo →](https://www.topabel.com/design/help.html#brand)  [Save & download →](https://www.topabel.com/design/help.html#save)  [Share for sample review →](https://www.topabel.com/design/help.html#handoff) 

One finished design becomes a repeated production layout
One target at left is repeated in three columns and two rows on the right. Space remains between units and outside the layout for cutting and process marks. This is a layout concept with no actual machine dimensions.

123
Concept diagram / 1: individual design. 2: repeated layout. 3: space for processing. Not an actual imposition or machine-readable registration file.

Repeat and spacing

Arrange repeated designs on the usable sheet or web. Leave room for cutting and other process requirements instead of filling every available gap.

Direction and order

Decide which edge enters first and how each repeated design is oriented. The print file, cut file and finished-roll requirement should use the same direction reference.

Registration references

Keep trim boundaries and equipment registration references separate. Where optical marks are needed, use the workflow and mark format required by that equipment.

Why a size change matters

Even if the illustration stays the same, a different outer size can change how many units fit, the cutting path and the arrangement of finished pieces. Recheck the layout together with the next operation.

Prepress references and file handover

A practical handover identifies the current artwork, production layout, direction, cutting path and required equipment marks. Imposition examples show how repeated units and printer marks are combined; actual registration marks must follow the machine workflow.

 [Fiery · Repeat imposition example ↗](https://help.fiery.com/ref/workflows/en-us/GUID-5338810E-889A-466B-8A89-E0879C72790D.html)  ·  [Roland DG · Print/cut workflow ↗](https://downloadcenter.rolanddg.com/contents/manuals/VERSAWORKS_USE_EN_R11.pdf) 

 [Discuss a design revision →](https://www.topabel.com/custom-oem/#artwork-sampling) 

    02

Plan the job around what must be processed.

Design count, quantity, surface operations and final outline affect the preparation and handover between processes.

Swipe horizontally to read all columns.

Four questions to resolve in a production plan

Job requirement

Planning decision

Effect on the next step

Several designs in one order

Separate the quantity and file revision for each design, then review whether they can share a layout and settings.

Keep the printed lanes or sheets and their intended finishing outputs identifiable.

A repeat design in a longer run

Review repeat layout, output preparation and production changeovers for the chosen process.

Agree how the repeated output will be divided into finished pieces or rolls.

An additional surface operation

Review the trial result and compatibility with printing and subsequent cutting before fixing the sequence.

The surface condition becomes an input to the following operation.

Different target and patch outlines

Separate the cut paths, required cut depth and retained liner areas in the finishing plan.

Peeling and material separation depend on this arrangement.

These are planning questions for a manufacturing job. The equipment, sequence and trial scope are confirmed for the selected material and product.

    03

The next machine needs the same position reference.

A correct-looking print still needs to meet the intended cut path. Registration connects these two operations.

![Printing equipment viewed from the side in the workshop.](https://www.topabel.com/assets/company/printing-press-side-retouched-20261118.webp)

Workshop photograph / Printing stage

Before starting

Match the artwork revision, production layout and cutting file. Check direction and scale before using a position adjustment to compensate for a file mismatch.

At the first output

Use a trial output to compare the printed image and intended cut position. A position accepted for printing should still be usable by the next operation.

Across the run

If alignment differs, distinguish a similar offset on every repeat from a difference that changes along the feed direction. The pattern helps decide what to review.

Solid rings: printed artwork · Dashed rectangle: intended cut outline

Shared position reference

Compare the intended image position with the finished outline.

A visible positional difference

Record direction and extent, then review the files and registration.

Position diagram, exaggerated for clarity; no acceptance tolerance is implied.  [Roland DG · Print and cut alignment ↗](https://downloadcenter.rolanddg.com/contents/manuals/PrintAndCut_SHE_EN.pdf) 

    04

An outline, a sheet edge and a roll are three jobs.

Die cutting, sheet separation, slitting and rewinding address different parts of the finished format.

![Die-cutting equipment photographed for the supplier audit.](https://www.topabel.com/assets/company/audit-die-cutting.webp)

Supplier audit photograph / Equipment record

01 / Define the individual outline

The cut path defines a target or repair patch. For peel-off pieces, the cut depth must suit the construction so the face separates while the liner still supports it.

Handover: outline file, cut mode, test-cut result.

![A flatbed cutting head above sheet material.](https://www.topabel.com/assets/company/flatbed-cutting-head.webp)

Workshop photograph / Cutting head

02 / Separate the finished sheet

A sheet or individual piece needs its outside edge separated from the surrounding material. The final outline, remaining mounting border and print position need to agree in the same layout.

Handover: finished outline, alignment reference, sheet arrangement.

![Roll cutting equipment recorded in the supplier audit.](https://www.topabel.com/assets/company/audit-roll-cutting.webp)

Supplier audit photograph / Equipment record

03 / Organize the finished roll

Slitting divides a wider web into narrower lanes. Rewinding organizes material into finished rolls. These decisions concern the web width and roll arrangement, separately from each target’s cut outline.

Handover: lane width, core, winding direction and contents per roll.

Why a test cut comes before settings are fixed

Cutting results depend on the blade, material and machine settings. A setting that separates one stock cleanly may not work the same way on another. Trial cutting is used to check separation and the retained backing before settling on the settings for that job.

 [Roland DG · Test cutting and material settings ↗](https://downloadcenter.rolanddg.com/contents/manuals/CJ-540_USE_EN_R4.pdf) 

Equipment photographs document the workshop and supplier audit; the operations above explain manufacturing tasks, not a claim that every pictured machine is used for every SKU.  [See the workshop and equipment records →](https://www.topabel.com/factory/) 

    05

A small change can reach more than one operation.

Track what changed in the production inputs, then identify which files, settings and outputs need another review.

Swipe horizontally to read all columns.

Change impact across a production job

Change

Review before output

Review in finishing

Logo or wording

Artwork revision and output file; confirm any process-specific preparation that changes.

Check nearby cut paths and retained margins if the new content is close to an edge.

Finished size or outline

Repeat layout, orientation and usable area.

Cut path and tooling where applicable; sheet or roll arrangement.

Material

Material reference, output compatibility and any trial needed.

Trial-cut settings, separation and handling of the retained backing.

Targets per roll

Identify the artwork and individual target specification that remain in use.

Finished-roll arrangement, counting basis and corresponding label information.

A useful handover record

Keep the job reference, artwork and cut-file revisions, material reference, trial result and agreed finished output together. For a repeat run, compare the changed fields before reusing the earlier setup.

    06

Describe the difference before naming the cause.

A location, a direction and a pattern of change are more useful than a single photo labelled “not right”.

The print-to-cut offset is similar on every piece

First compare the artwork and cut-file origins, orientation and registration reference. A repeatable fixed offset and a changing offset are different observations; record the direction and extent before adjusting anything.

The beginning aligns, but later positions move

Compare several positions along the feed direction, including repeat spacing and any change of material position. Mark where the difference begins. Review the feed and registration method for the actual equipment, rather than moving the entire cut file by guesswork.

A sticker will not separate cleanly, or the liner tears

Keep an unpeeled sample and a peeled example. Check the cut line and liner, then review the blade, material and test-cut settings. Equipment guidance treats force, speed and blade offset as material-dependent settings; there is no single setting for every stock.

A repeat order differs from the earlier run

Compare artwork and cut-file revisions, material references and production conditions before naming a cause. A shared product name alone does not establish identical production inputs.

Troubleshooting prompts, not a diagnosis of a specific batch. Cutting parameter reference:  [Roland DG · Material-dependent cutting conditions ↗](https://downloadcenter.rolanddg.com/contents/manuals/GS2-24_USE_EN/oze1632803681405.html) 

CONNECT THE DESIGN WITH THE PROCESS

What does your design need from production?

Bring the design, intended outline and finished format. Use the cooperation guide to discuss revisions, trials and the production requirements for the project.

 [Explore Custom & OEM →](https://www.topabel.com/custom-oem/)  [Explore the workshop](https://www.topabel.com/factory/) 

Related reading

 [Product formats, specifications and sample inspection →](https://www.topabel.com/resources/kb/fundamentals/)  [Production quality and sample evaluation →](https://www.topabel.com/factory/quality/)
