TARGET PAPER · STICKERS · CUSTOM SOURCINGquote@topabel.com
TOPABEL中文

TOPABEL KNOWLEDGE SERIES / 06

How to read target paper specifications

Use the complete SKU to identify the product. Read its physical parameters and pack contents in the product specifications, then check the order quantity and price unit in the quotation. Each source answers a different part of the purchase.

Identify the exact product with its SKU

A SKU is the product’s identifier. Keep the entire code when searching, requesting a sample or checking a quote. For the example below, the product specifications confirm a 4 × 4 inch sticker; the 0404 segment is a useful size cue for this model. Read the backing, material and packing in the product description as well.

TB-TR-QF-0404-RA-SPL-03

SKU
Match the complete product identifier and its photograph.
Specifications
Find the dimensions, material, paper weight, thickness and pack contents here.
Quotation and order
Check the selected packing, ordered quantity, price and the unit attached to that price.

Paper weight, thickness and pack contents come from the product specifications. The ordered quantity comes from the order.

Read the physical parameters

Start with one finished sheet or sticker. Its size describes the outside edges after cutting, including any surrounding white margin. The printed area sits within those edges, and a main aiming zone may be only one part of that area. For a circular sticker, check the stated diameter.

Dimensions and units
Check width × height and the unit. 1 in = 2.54 cm, so a 4 × 4 inch sticker measures 10.16 × 10.16 cm. Roll dimensions may describe one sticker.
Face material
The material carrying the print, such as paper, film or board, should be stated for the selected SKU.
Paper weight, g/m²
This is the mass of one square metre of the specified paper. Check which paper layer the value describes when comparing adhesive products.
Thickness, mm or µm
Thickness is measured through the material. Confirm whether a value covers the face material alone or the full construction including adhesive and liner.
Backing and release liner
Check whether the product is adhesive. The removable liner protects the adhesive before application.
Surface finish
Standard print, reactive splatter and thermal products describe different surface features. Confirm the finish in the selected product’s description.
A square TOPABEL target shows its finished outer edge and printed circle; a second view shows a corner peeled from the white release liner.
  1. Finished outer edge
  2. Printed target area
  3. White release liner

AI-generated illustration

Paper weight and thickness are separate specifications. Use the stated material values for the selected SKU when making comparisons.

Separate pieces, packs and order quantities

A single target, the contents of its package and the quantity ordered describe three different counts. For the TOPABEL roll in this article, each sticker is 4 × 4 inches and each roll holds 100 stickers. Ordering 100 rolls is an arithmetic example below.

One piece
One sheet or one sticker. The individual size applies to this item.
Package contents
How many sheets are in a pack, or how many stickers are on a roll. Check the selected packing.
Order quantity
How many pieces, packs or rolls the order specifies. Always write the number with its unit.
One square green-and-black TOPABEL sticker sits beside a roll of the same design with its core and paper layers visible.
  1. One finished sticker
  2. One complete roll

AI-generated illustration

100 rolls × 100 stickers per roll = 10,000 stickers

A pack is a packaging unit. Its sheet count must be stated separately. Confirm any MOQ together with its purchase unit.

Read the unit attached to the price

Put the price and unit side by side when comparing quotations. A per-piece price applies to one finished target. A per-pack price applies to a stated pack. TOPABEL roll products are quoted per complete roll. Compare the contents as well as the number on the quotation.

Read together
Currency, unit price, price unit and contents per pack or roll.
Calculate on the same basis
Multiply unit price by the ordered quantity in that unit. For a piece-cost comparison, divide the pack or roll price by its contents.

If one roll costs P and you order 100 rolls: product amount = 100 × P

For a roll of 100 stickers: equivalent price per sticker = P ÷ 100

P represents the quoted price in its stated currency. These formulas illustrate unit conversion; use the confirmed quotation for the actual order.

Read two real product specifications

12 × 18 inch standard paper sheets
12 × 18 inch standard paper sheetsNon-adhesive flat sheets, quoted per piece. Confirm the number of sheets in each pack. TB-SI-ZP-1218-SP-STD-07 ↗
4 × 4 inch reactive sticker roll
4 × 4 inch reactive sticker rollSelf-adhesive paper, 100 stickers per roll, quoted per roll. TB-TR-QF-0404-RA-SPL-03 ↗
Read two TOPABEL products using the same fields
SpecificationPaper sheet exampleSticker roll example
Finished dimensionsOne sheet, 12 × 18 inOne sticker, 4 × 4 in
Face materialPaperPaper
Adhesive backingNon-adhesiveSelf-adhesive, with release liner
Surface finishStandard printReactive splatter
Supply formatFlat sheetsRoll
Pack contentsConfirm sheets per pack100 stickers per roll
Price unitPiece, one sheetRoll, one complete roll
Paper weight and thicknessConfirm the parameters for this SKUConfirm the parameters for this SKU